Aerosol
Generator

Tekceleo offers two simple, modular product lines of microsprayer that allow scientists to generate precision aerosols without altering the formulation.

Electronic nebulizer

Plug and Play Electronic Aerosol Generator for liquid

Atomization by vibrating mesh amplified Aerosol Generator

Tekceleo’s Micronice nebulization technology is commonly used for precise atomization of relatively low viscosity liquids (viscosity < 3mPa s). Our droplet generators are based on the concept of vibrating mesh nebulization, which atomized the liquid without increasing temperature or pressure. In addition, our simple and modular design, a simple kit, is perfectly adaptable to any research environment.

Our devices can guarantee monodisperse aerosol particles and no alteration of the atomized solutions, which is particularly appreciated in the context of aerosolization of pharmaceutical and biologic formulations. Among our customers, the most common laboratory uses for our scientific atomization solution are: 

  • Microbiology (bioaerosol generation, microorganisms, fungi, etc.)
  • Medical research (bacteria, viruses, pollen…)
  • Thermal and material study 

Thus, our nebulizers are perfectly suited for aerosol generation, especially as a easy to use microsprayer for laboratory environment.

For this purpose, we have developed the P&S T45, which comes with a 10mL tank and allows to atomize small volumes of solutions, reagents, substrates and compounds in an ergonomic and precise way. With the same device, depending on your uses, you can use our nebulizer as a : 

  • Aerosol Generator 
  • Bioaerosol Generator
  • Droplet Generator
  • Micro sprayer device
  • Aerosolizer 
  • Spray dryer (piezoelectric atomization particularly appreciated in spray drying function in drying chamber) 
Atomiseur de précision T45

Easy-to-use precise aerosol generator

P&S T45: one simple microspray device

Our P&S T45 is currently used in more than 30 laboratories around the world for research or sample analysis. As an aerosol generator, it is particularly appreciated for compounds requiring not to alter the atomized solution (no thermal nor pressure changes), like bioaerosol.

In a nutshell, benefits of our P&S T45 product as a Droplet Generator are multiple: 

  • Miniature and compact (nozzle dimensions: 20x16x16mm), easy to use (by hand or on tripod) ;
  • Electronic: controllable via an ergonomic touchscreen, which allows to modulate precisely the flow rate by increments of 1%;
  • No temperature nor pressure rise, stable and monodisperse aerosol;
  • Low power consumption (<3W per nebulizer head);
  • Adaptable and controllable flow rate, unique for Aerosol Generator device, from 0.1 mL/min to 40 mL/min depending on the selected flow rate and particle size;
  • Particle size depends on the membrane, allowing customization for your use, with a range of drop sizes from 04 to 50 microns;
  • No noise during operation; 
  • Stainless steel membrane option, for highly corrosive liquid;
  • No dead volume (all the liquid is nebulized);
  • 10 mL easily refillable and cleanable tank.

Automated Aerosol Generator for long operating time

P&S360 for 360° automated aerosol generation

For some experimentation and laboratory uses it can be convenient to set up a droplet generator that can atomize in all directions, and with little to no human intervention. 

The P&S360 allows this. This modular kit, with the addition of a complete fluidic system, and controlled by electronics, allows to nebulize a liquid in all directions and according to cycles that can be pre-programmed. 

This specific device, in laboratory and research environment, can be used as a spray dryer atomizer, a droplet generator, a precise humidifier or even an airborne disinfection device, as it can support H2O2. This kit has the same specifications than the P&S T45, but with a complete fluidic system:

  • Low footprint (nozzle dimensions: 20x16x16mm), easy to adapt at your environment of use  ;
  • Electronic: controllable via an ergonomic touchscreen, which allows to modulate precisely the flow rate by increments of 1%;
  • No temperature nor pressure rise, stable and monodisperse aerosol;
  • Low power consumption (<3W per nebulizer head);
  • Adaptable and controllable flow rate, from 0.1 mL/min to 40 mL/min depending on the selected flow rate and particle size;
  • Particle size depends on the membrane, allowing customization for your use, with a range of drop sizes from 04 to 50 microns;
  • No noise during operation; 
  • Stainless steel membrane option, for highly corrosive liquid;
  • No dead volume (all the liquid is nebulized);
  • Fluidic system already integrated with touch screen control;

A technology allowing modular Aerosol Generator

Atomize all your formulation, for scientific experiments and aerosolization uses

 

ISO 9001 Certified, Tekceleo is a key partner for academic actors and private laboratories. As an experienced manufacturer working with extremely demanding industrial sectors, we position ourselves as a key partner for research organizations.  

With affordable prices, a simple and ergonomic function and a very present technical support, our value proposition one of the most competitive in the market of aerosol generation, atomization and droplet generation. Moreover, our line of product is fully adaptable, with two main references : P&S T45 for simple and hand-held uses, P&S360 for more integrated and automated processes.  

Our catalog currently has 6 particle sizes on the shelf for aerosol generator applications: 

  • 04 microns 
  • 10 microns 
  • 12 microns (stainless steel option)
  • 17 microns 
  • 20 microns 
  • 50 microns 

Droplet size distribution data sheet are available on demand.

This range can be extended on request, depending on the liquids to be atomized. Our technical support team is here to help you on your use case and can work on your specifications in order to develop a specific product for your droplet/aerosol generation use case (microbiology, coating, aerosol dispersion, study of micro-organisms…).

Because, even if our P&S T45 kit is a product in itself, its modularity allows it to be freely adapted to your uses. Our design office can therefore, on specific request, work with you on specific adaptations of our products. 

  • This field is for validation purposes and should be left unchanged.

Need more information ?

Tekceleo
609 Route de la Roquette
06250 Mougins